Climate link

[jere19]

Hello,
I just received my connexionbox and first of all I want to thank you for the integration !
I also tried to link with a climate entity and it just works!
You need to set up a generic thermostat with the switch and whatever temperature sensor you may have (I used the average of the half dozen xiaomi bluetooth sensors i have in my house).
Here's the config:

climate:
  - platform: generic_thermostat
    name: PoeleMaison 
    heater: switch.stove_status
    target_sensor: sensor.TemperatureInterieure
    hot_tolerance: 1.0
    cold_tolerance: 0.5
    min_temp: 17
    max_temp: 22
    ac_mode: false
    min_cycle_duration:
        minutes: 30

I'll try to make a pull request soon to enhance a bit the documentation, I'm still struggling to understand some parts :)

I'm impressed at the sensors/counters palazzetti exposes (all temperatures, cumulative pellet usage, etc.). It would be nice to expose some of them as proper sensors.

[Vost3]

Hi Jere19.
Have you continue to use climate for stove regulation ?
Can you return your usage experience ? not much start and stop of stove ?

[jere19]

I've been using it since my post. It works almost flawlessly. I only had a couple misfires because of ashes in the burner. For this I wrote an automation to send me a reminder to clean the stove when it stops. I also wrote a sensor to monitor pellet usage and get a bag out of the garage when running low but it still needs some calibration I think.
Here's the graph of the thermostat over 24h :

Blue line is the target (18.5°c) and the green areas are when the stove is heating. Outside temp. was between 0 and 3 that day.

[smunos66]

hello,
interesting . Have you set the stove to mode 1 (operation with room sensor on stove) or mode 2 (With external themostat) ?
thanks !